CHARLEY  ROBERTSON'S

SCORE HIGH GUNSMITHING

9812-A  COCHITI S.E.
ALBUQUERQUE, NM 87123

800-326-5632   505-292-5532    Fax 505-292-2592

Price List # 13b                                            Effective January 1st 2007

E-mail us at scorehi@scorehi.com

     The proof is in guns that shoot . Why is it that some people can consistently build rifles that out perform those of the competition? It's no accident. It comes from hard work, experience and a desire to achieve unparalleled perfection. The goal is simple ,build rifles that are capable of extreme accuracy. Whether the temperature is a scorching 105 or a cold to the bone -40. Dry desert or tropical rain forest. This can only be achieved with the highest quality materials the best equipment and the best people.

Each situation is different in its needs and goals. That's why we build a variety of different guns all specially built to do the job as only the right tool can. Keeping these needs in mind along with the newest of benchrest technology is how we build each gun. From the Light Weight Packer to the Heavy Bench. The Deluxe Safari to the Police Sniper, or maybe the Practical Sporter best fits the need. WE BUILD ACCURACY!!

Our Products

Our Custom Rifles

Our Services

Miscellaneous

Remington 700 Accurizing  Service.

Level 1, The level 1 service entails improving upon almost every aspect of your rifle short of re-machining the barrel and receiver.  This service make the most dramatic change and usually enables your rifle to shoot sub MOA Groups.  Because of the different stock bedding techniques the level 1 service is broken down in to level 1a and 1b

Level 1a,    $265.00
For Rifles with an aluminum stock bedding block such as
Sendero or H-S Precision.

1. Barrel diagnostic.
2. epoxy bed the aluminum bedding block and float barrel
3. Re-crown the barrel with an 11 degree counter-bore style crown.
4. Trigger tune.
5. Line bore Rings and bases and mount scope.
6. Lap bolt Lugs

Level 1b,    $315.00
For Rifles with wood or synthetic stocks that can be aluminum pillar bedded.

1. Barrel diagnostic
2. epoxy bed stock with aluminum pillars and float barrel
3. Re-crown the barrel with an 11 degree counter-bore style crown.
4. Trigger tune.
5. Line bore Rings and bases and mount scope.
6. Lap bolt Lugs

 

Level 2  Gives you that last bit of accuracy that can only be achieved with a match quality chamber and a perfect receiver barrel fit.  The level 2 many times raises your rifle’s accuracy to that of a full blown custom rifle depending on barrel quality.

   Level 2a $635

1. Everything in Level 1a
2. Blue print receiver
3. Remove original barrel thread extension.  Rethread barrel to precisely fit receiver.
4. Re-cut chamber to match quality and polish.

Level 2b $685

1. Everything in Level 1b
2. Blue print receiver
3. Remove original barrel thread extension.  Rethread barrel to precisely fit receiver.
4. Re-cut chamber to match quality and polish.

 

Options

1. Drill and re-tap Scope base holes to 8x40 for better alignment and more strength.
2. Tactical Bolt handle
    Badger knob
    Holland’s
    ECT
    Taylor
3. Leupold Dual Dove tail Rings and bases
4. Badger 20 Minutes tapered rings and bases.
    One piece
    Two piece
5. H-S Precision PST-25/26 stock vertical grip with adjustable Length of pull and adjustable comb.
6. H-S Precision PST03C stock vertical grip with adjustable Length of pull and adjustable comb.

The Remington 700 is the work horse of today’s rifleman.  It was was action of choice for the Marine M40 Sniper Rifle for many good reasons.  It is strong, rugged reliable and most of all, naturally accurate.  It is still the action of choice as a foundation for today’s most accurate rifles.  Remington Arms does a fine job producing these rifles but they can only do so much and still produce an affordable rifle.  Just like everything else, the devil is in the details and this is where we shine.  As a professional gunsmith since 1979, I have seen fads come and go.  I have seen what works and what does not.  I have looked at countless rifles from the stand point of “What should be done to this rifle to make it more accurate, more reliable and more in tune for the specific task at hand”

Depending on your needs we offer 2 levels of accurizing services to Remington 700 rifles.  All Remington 700s fall into one of two categories light/sporter or heavy/target.  The light/sporter models are confined to only level 1 (unless the barrel is replaced).  Because the taper of the  light/sporter barrel starts immediately at the recoil lug and tapers quickly to a sporter weight there is not enough barrel material to remove all of the original threads and cut new ones.  The heavy/target models such as, but not limited to, the Sendero, VLS, VSF, or BDL Varmint are suited to both levels of our accurizing services.

Pro-Bed 2000

The ultimate epoxy bedding compound!

      Epoxy or glass bedding has been popular for many years as a tool for accurizing rifles of all types.  Accuracy depends on shot-to-shot consistency.  A great deal of a rifle’s ability to achieve this consistency is dictated by the relationship of the metal and the stock.  During the firing process, a great deal of recoil or kick is created which tends to shift the barrel and action in the stock.  This change dramatically affects the rifles ability to achieve shot-to-shot repeatability.  In order to achieve extreme accuracy, we need to go beyond just good fit.  We need to manage vibration cycles.  In nature, all things vibrate and in order for a rifle to achieve extreme repeatability we must minimize the vibration cycles and make them as consistent as possible.  Once again we are back to the stock to metal fit.  Pro-Bed 2000 epoxy is the best tool available to meet that requirement.  There has been a number of epoxy products used by the gunsmithing fraternity over the years and almost all of them were not designed for the sole purpose of accurizing rifles.  Pro-Bed 2000 was formulated by a gunsmith with over 20 years of professional experience in epoxy bedding rifles.  Pro-Bed 2000 directly addresses every problem unique to epoxy bedding.  

Anyone can get professional results using Pro-Bed 2000.

SCORE HIGH ADJUSTABLE
BEDDING PILLARS
Available For
Remington Model 700s
Winchester 70s / Montana 1999s
&
Howa 1500 / Weatherby Vanguard.

Click Here to view a in depth presentation using the Score High Adjustable Pillar bedding System.

Click here to see installation Instructions

ACCURACY. Everybody wants good accuracy, from the twice a year hunter to the competitive bench rest shooter. A properly bedded rifle will do more for accuracy than any other single investment. The SCORE HIGH BENCH REST PILLARS enable you to do just that, and do it easier than any other pillar system on the market. This item is a must for anyone who requires the most in accuracy from their rifle. Gunsmiths and shooters alike will appreciate easy installment and the solid, non flexing, action to stock fit. The pillars match the contour of the action (Radius for Remington or Flat for Winchester 70) for the best in a stress free fit. The pillars mount directly to the action to maintain perfect alignment. No marking, cutting, filing or machining. The pillars are adjustable for proper action to trigger guard spacing. Because they are attached to the receiver they will not rotate during bedding (a gunsmith's pet peeve) as with other current pillar systems. Three kits enable you to choose what is right for you:

Click Here to view a in depth presentation using the Score High Adjustable Pillar bedding System.

Order On-Line

The pricing is the same for Remington, Winchester or
 Howa 1500 / Weatherby Vanguard kits

Deluxe Kit: $55.95   This kit comes with everything needed to to properly pillar bed a rifle, Adjustable pillars, reusable installation hardware, Black or Brown, Pro-Bed 2000 bedding epoxy mold release wax modeling clay and an installation guide on CD-ROM.

Gunsmith Kit: $44.95   This kit comes with Adjustable pillars and reusable installation hardware and an installation guide on CD-ROM

Refill Kit: $22.95   If you have purchased one of the other kits this is all you need. Includes pillars only.

Pillar Drilling jig for Remington 700

$239.95   for the complete set for 700 LA, SA ADL and BDL.
$134.95   for specific models such as 700 ADL short action

It has never been easier to drill a Remington 700 stock to accommodate bedding pillars than with our Pillar Drilling Jig. You no longer need a milling machine or even a drill press. Hardened steel drill guide bushings are held in place by a round bar the same diameter as a Remington 700 receiver. This bar is accurately positioned on the top of the stock’s inletting using a special guide pin that pilots off of either the front or rear trigger guard screw hole. The top bar with the drill bushings are held firmly in position by a screw passing thru the top bar and into a special platform machined to fit the bottom of the stock. Once the drill jig is firmly in position the hardened drill bushing will not allow the special drill bit supplied with each kit to wonder from the correct path. It takes literally seconds to accurately drill any Remington 700 stock to accept bedding pillars using only a hand drill.

 

            


 

Click here to view a 12.5 Megabyte Video of the stock drilling jig in action

Piloted counter bores: $57.95

FUMED SILICA

Score High Benchrest Followers

$12.95 plus $3.00 shipping and Handling

Order On-Line

Easily Convert your bolt action rifle to a single shot with the Score High Benchrest Follower. No more scratched cases, no more battered bullet noses, No more fumbling around trying to load your bolt action rifle one round at a time. You simply insert the Score High Benchrest Follower in your magazine on top of the factory follower and spring. There it serves as a tray that positions the cartridge directly in line with the chamber for smooth, trouble free loading. This item is a must for any serious target, varmint or silhouette shooter, or for any body who requires the utmost accuracy from their rifle.

No gunsmithing required. These followers are designed and engineered to fit one specific bolt action rifle. Over 21 models available. All are machined from 6061-t6 aluminum.

We are proud to have our products available from the following distributors

Midway USA distributes our: Benchrest Followers, Adjustable Pillar Bedding Kits and Pro-Bed 2000 bedding epoxy

Lock Stock and Barrel distributes our: Benchrest Followers, Adjustable Pillar Bedding Kits and 
Pro-Bed 2000 Bedding epoxy

Kinneman's Custom Products distributes our: Benchrest Followers, Adjustable Pillar Bedding Kits and 
Pro-Bed 2000 Bedding epoxy

Sinclair distributes our Benchrest Followers and Adjustable Pillar Bedding Kits.

Brownell's distributes our: Benchrest Followers

Russ Haydon's  distributes our Benchrest Followers

Graf and Sons distributes our Benchrest followers

Muzzleloader Builders supply Distributes Pro-Bed 2000

Heinz Henke distributes our Benchrest Followers

Score High Muzzle Brakes

    The Hunter $139.00 Installed

       Our most popular brake

As of 9/3/2007 our current turn around time is 10 business days.

Eliminate 60% to 80% of your rifle's recoil by using it's expanding gases to brake the rearward movement of almost any center fire rifle. Kick is produced in two different ways referred to as PRIMARY and SECONDARY recoil. The powder in your cartridge when ignited, expands violently, pushing the bullet through and out your barrel, but for every action there is an equal and opposite reaction, this is primary recoil. Unfortunately this is something we must all learn to live with because there is nothing we can do to reduce it or eliminate it. Fortunately this makes up for only a small percentage of your rifles kick. Secondary recoil is the big problem. This is the recoil created when those gases escape the end of your barrel and propel your rifle like a rocket into your shoulder. Fortunately this can be dealt with by using a muzzle brake. When the bullet leaves the end of the barrel and passes through the break, the back of the bullet acts like a valve and the gases are released at right angles to the barrel canceling each other out and eliminating the gas induced, or secondary recoil. The SCORE HIGH MUZZLE BRAKE has a row of ports on top to eliminate muzzle rise and no ports on the bottom so as not to raise dust off the ground or create shock waves off the ground.

*NOTE*
Noise level is increased by Approximately 25 %. Always wear quality hearing protection!

 Click here to see how to ship us your rifle.

All rifles are not the same.  They vary in design according to their application.  Just as using truck tires on a sports car gives poor handling so does using a hunting rifle style muzzle brake on an AR (automatic rifle) style rifle.  In order for each type of rifle to achieve the best possible performance we have found it necessary to make the  Score High Muzzle Brake in 3 different styles, The Hunter, The Tactical Bolt and The AR Brake.

 The expanding gas that creates recoil always forces the rifle backwards on the center line of the bore.

 On a hunting rifle the center of support or the center of the butt plate is significantly below the center of the bore and the greater that difference the more the muzzle of the rifle will rise when fired.  The Hunter  style Score High Muzzle Brake has four ports on each side, no ports on the bottom, and four smaller ports on top.  The escaping gases from the top ports hold the rifle’s muzzle down, offering the shooter the greatest control over the rifle. 

 Tactical bolt action rifles or rifles primarily fired from a bipod have a different need.  The downward thrust from the 4 top ports exerts pressure on the bipod causing a slight bounce during recoil.  The Tactical Bolt style Score High Muzzle Brake, with the top of the brake limited to 2 ports, perfectly balances the muzzle rise with the downward thrust for the best bipod optimizing shooting performance.

 Because  AR (Automatic Rifle) style rifles are supported so close to the center of the bore top ports actually drive the muzzle down robbing the shooter of total control.  The AR Brake style Score High Muzzle Brake has no ports on top or the bottom, it only has 4 large ports on each side, giving total control with both automatic and semi-automatic fire.

   The Hunter $139.  Installed

 The Hunter, $139 installed.  This requires a gunsmith installation and includes threading and re-crowning the muzzle, custom fitting and finishing of the brake to match the current finish on the rifle.  Available in stainless or blued.

 The Tactical Bolt, $179.00 installed.  This requires a gunsmith installation and includes threading and re-crowning the muzzle, custom fitting and finishing of the brake to match the current finish on the rifle.  Available in stainless or blued.

                         The AR Brake,  $90.00.  Each AR Brake comes with a timing nut and is available in 3 sizes that fit factory threaded barrels:  Available in gray parkerized finish.  No gunsmithing required on factory threaded barrels.

                AR-15  .750”: O.D.  ½ X 28 TPI
                AR-10  .875” O.D. 5/8 X 24 TPI
                AR-FN240 1.00” O.D .577” X 24 TPI to fit the FN-240 Rifle

                                We can thread barrels that are not factory threaded, please call for pricing.

CUSTOM RIFLES

Practical Sporter

Click On the above image to view a large downloadable graphic.

The Score High Practical Sporter Rifle comes standard with a Blue printed Remington 700 action,  to insure the best possible performance. This rifle comes standard, fitted with a number 4 contour Shilen Chrome-moly Match barrel and aluminum pillar bedded, McMillan Remington Sporter Style Stock with a Pachmayer decelerator recoil pad. The metal is gray parkerized for a maintenance free non-glare finish.

SPECIFICATIONS

Weight ........................................................ 7 Pounds without scope

Barrel Length .................................................................... 24 Inches

Length of pull ................................................................ 13.5 Inches

Color of Stock ........................................................ Black Textured

Rings and Bases.............................................. Leupold Dual Dovetail

Trigger Pull ................................................... 3.5 Pounds Adjustable

Standard package less scope $2315.00. The following options and accessories are available by adding these prices to the standard package price.

Any standard color ................................................................... N/C

Blued instead of parkerized......................................................... N/C

Any standard or magnum cal. (Most Ack Imp versions available) ..N/C

Custom length of pull ................................................................. N/C

Custom barrel length up to 26 inches .......................................... N/C

Score High Muzzle Brake ..................................................... $139.00

Thread protector for use without muzzle brake ...................$15.00

Shilen Match Barrel stainless ............................................... $80.00

Shilen Select Match Barrel stainless ..................................... $130.00

Walnut Classic Style Stock checkered with shadow line cheek piece, no Monte Carlo........................................................................... $640.00 (pictured Above)

Walnut Sporter Stock with Monte Carlo and cheek piece and checkered................................................................................... $640.00

McMillan Remington Classic Style Stock .................................... N/C

McMillan Remington Mountain Rifle Stock ................................. N/C

McMillan Remington BDL Stock ................................................ N/C

Jewell trigger with safety and bolt release ................................$200.00

Titanium Firing Pin with heavy spring ...................................... $70.85

Flute barrel of choice ........................................................... $250.00

3-Position Safety (Winchester mod 70 style) ......................... $230.00

Sako Style Extractor ............................................................ $175.00

Williams iron sites installed .................................................$120.00

Light Weight Packer

Click On the above image to view a large downloadable graphic.

The Light Weight Packer comes standard with a Blue printed Remington 700 action,  to insure the best possible performance. This rifle comes standard, fitted with a custom three taper feather weight style Shilen Chrome-moly Match barrel and aluminum pillar bedded, Brown Precision Classic Style fiberglass stock fitted with a Pachmayer decelerator recoil pad. The receiver has been turned down and the bolt fluted to remove as much weight as possible. The metal is gray parkerized for a maintenance free non-glare finish.

SPECIFICATIONS

Weight................................................... 5 7/8 Pounds without scope

Barrel Length ..................................................................... 22 Inches

Length of pull ................................................................. 13.5 Inches

Color of Stock ........................................................ Black Textured

Rings and Bases ................................................................... Weaver

Trigger Pull .................................................... 3.5 Pounds Adjustable

Standard package less scope $2834.00 The following options and accessories are available by adding these prices to the standard package price.

Any standard color ................................................................... N/C

Bluing instead of parkerizing ....................................................... N/C

standard or magnum caliber (Most Ack Imp versions available)...... N/C

Custom length of pull ............................................................... N/C

Custom barrel length up to 24 inches .......................................... N/C

Score High Muzzle Brake ..................................................... $139.00

Thread protector for use without muzzle brake ...................$15.00

Shilen Match Barrel stainless ............................................... $80.00

Shilen Select Match Barrel stainless ..................................... $130.00

McMillan Remington Mountain Rifle Stock (add 8oz. to rifle) ...............$120.00

Jewell trigger with safety and bolt release ..................................$200.00

3-Position Safety (Winchester mod 70 style) ......................... $230.00

Sako Style Extractor ............................................................ $175.00

Williams iron sites with front ramp soldered on ....................$120.00

Police Sniper

Click On the above image to view a large downloadable graphic.

The Score High Police Sniper Rifle comes standard with a Blue printed Remington 700 action,  to insure the best possible performance. It comes fitted with a #7 contour Shilen Chrome-moly Match Barrel and H-S Precision PST03F Tactical Stock with fixed length of pull and fixed non-adjustable comb (above Picture is with H-S PST03C with with adjustable length of pull and adjustable comb). The metal is gray parkerized for a maintenance free non-glare finish.

SPECIFICATIONS

Weight.................................................................. 11 to 11.5 Pounds

Barrel Length ..................................................................... 24 Inches

Length of pull ................................................................ 13.5 Inches

Color of Stock ........................................................ Black Textured

Rings and Bases ............................................. Leupold Dual Dovetail

Trigger Pull ................................................... 3.5 Pounds Adjustable

Magazine Capacity ............................................................ 5 Rounds

Standard package less scope $1970.00 The following options and accessories are available by adding these prices to the standard package price.

Any standard caliber ................................................. ................ N/C

Custom barrel length up to 26 inches .......................................... N/C

Score High Muzzle Brake ..................................................... $139.00

Thread protector for use without the muzzle brake ............... $15.00

Shilen Match Barrel stainless ................................................ $80.00

Shilen Select Match Barrel stainless ..................................... $130.00

Jewell trigger with safety and bolt stop ................................... $200.00

Titanium Firing Pin with heavy spring ...................................... $70.85

H-S Precision PST03C Tactical Stock  with adj. length of pull and adj. comb .........................$270.00 (pictured above)

H-S Precision PST25C Tactical Vertical Grip style wit adj. length of pull and adj. comb .........................$350.00

Flute barrel of choice ........................................................... $250.00

3-Position Safety (Winchester mod 70 style) ......................... $230.00

Sako Style Extractor ............................................................ $175.00

Heavy Varmint

The Heavy Varmint Rifle comes standard with a Blue printed Remington 700 action,  to insure the best possible performance. It comes fitted with a #7 contour Shilen Chrome-moly Match Barrel and aluminum pillar bedded, McMillan Remington Varmint Style Stock. The metal is gray parkerized for a maintenance free non-glare finish.

SPECIFICATIONS

Weight................................................................. 11 to 11.5 Pounds

Barrel Length ..................................................................... 24 Inches

Length of pull ................................................................. 13.5 Inches

Color of Stock ........................................................ Black Textured

Rings and Bases ............................................. Leupold Dual Dovetail

Trigger Pull .................................................... 3.5 Pounds Adjustable

Standard package less scope $2315.00 The following options and accessories are available by adding these prices to the standard package price.

Any standard color ................................................................... N/C

Custom polyurethane high gloss metallic automotive Candy Color paint........................................................................................... $400.00

Any standard caliber to fit short action Remington 700 ................ N/C

Custom length of pull ................................................................. N/C

Custom barrel length up to 27 inches ........................................... N/C

Score High Muzzle Brake ..................................................... $139.00

Thread protector for use without muzzle brake ...................... $15.00

Shilen Match Barrel stainless ............................................... $80.00

Shilen Select Match Barrel stainless ..................................... $130.00

Jewell trigger with safety and bolt release ..................................$200.00

Bi-Metal Light Weight Firing Pin with heavy spring .................. $70.85

Walnut or Laminated Thumbhole Varminter Stock ................ $640.00

Brown Precision Thumb Hole Varmint stock .......................... $75.00

Brown Precision Silhouette Stock .............................................. N/C (Pictured above)

McMillan Standard Silhouette Rifle Stock .................................. N/C

McMillan Thumbhole Silhouette Rifle Stock ...............................$75.00

McMillan Benchrest / Varmint Stock, light, heavy &sporter ........ N/C

McMillan Three Way Adjustable butt plate assembly ............. $150.00

Flute barrel of choice ........................................................... $250.00 (Pictured above)

3-Position Safety (Winchester mod 70 style) ........................ $230.00

Sako Style Extractor ............................................................ $175.00

Barrel Work

           Good accuracy greatly depends on having a quality barrel properly installed.  Great pains are taken to insure that you get the best possible accuracy from your selected barrel.  To start with, all barrel work is done in a four jaw independent chuck, indicated in to within .0001”.  Our reamers are fitted with a complete size range removable pilots.  Only a perfect pilot to bore fit  guarantees a concentric chatter free throat.  The crown of each barrel is cut with a razor sharp tool then polished and honed for the perfect bullet release  We have tight neck reamers along with short and standard length throats for almost all common target cartridges and we are getting more all the time. 

           We install barrels from a variety of manufactures from both pre-contoured blanks and unturned blanks.  These prices only include polishing and finishing of the new barrel.  We can refinish the entire firearm for an additional fee.  This service is priced on request. We can obtain barrels from any manufacturer if you have a favorite that’s not mentioned below.

   Standard Contoured Barrels installed on your action.

  Custom and non-standard options, add to the above prices.