Barrel Work

 

           Good accuracy greatly depends on having a quality barrel properly installed.  Great pains are taken to insure that you get the best possible accuracy from your selected barrel.  To start with, all barrel work is done in a four jaw independent chuck, indicated in to within .0001”.  Our reamers are fitted with a complete size range removable pilots.  Only a perfect pilot to bore fit  guarantees a concentric chatter free throat.  The crown of each barrel is cut with a razor sharp tool then polished and honed for the perfect bullet release  We have tight neck reamers along with short and standard length throats for almost all common target cartridges and we are getting more all the time. 

           We install barrels from a variety of manufactures from both pre-contoured blanks and unturned blanks.  These prices only include polishing and finishing of the new barrel.  We can refinish the entire firearm for an additional fee.  This service is priced on request. We can obtain barrels from any manufacturer if you have a favorite that’s not mentioned below.

 

   Standard Contoured Barrels installed on your action.

Bartlein Stainless Steel Match grade barrel

$705.00

Brux Chrome Moly Match Barrel

$650.00

Brux Stainless Steel Match grade barrel

$690.00

Krieger Chrome Moly Match Grade Barrel

$690.00

Krieger Stainless Match Grade Barrel

$705.00

 

  Custom and non-standard options, add to the above prices.

Any non-standard round contour 

$175.00

Flute any round barrel, maximum barrel length is 28 inches and maximum flute length is 19 inches.( Click here for details)

$250.00

Special throating on a new barrel that we install, add

45.00

Miscellaneous barreling services available.

Blue print Remington 700 action

$250.00

Suppressor Grade Muzzle Threading $85.00
Barrel cryo treatment, includes shipping to and from cryo center, removal and reinstallation.

$115.00

Cut and crown

$65.00

Special throating on customers existing barrel.  This includes removal and reinstallation

$80.00

Change cartridge where no thread alterations are required

$135.00

Change cartridge including cutting new threads,  requiring setting back barrel

without indexing for sights

$185.00

with indexing for sights

$225.00

Suppressor Grade Muzzle Threading.
We have been manufacturing and installing muzzle devices for over 30 years.  Because we do so much of it we have invested a great deal of resources into perfecting the process.  If you need the muzzle on your rifle to be threaded for a suppressor or you have a muzzle brake and you are looking for someone to install it our turn around time is a bout 1 week.  We can thread for both standard and metric threads left or right hand.

Suppressor Grade Muzzle Threading $85.00
Thread protector/cap, Blued or stainless $25.00
Fit your brake or devise This includes timing the devise using proper machine work negating the need for crush or peel washers $125.00